CMC ITALIA - Macchine per Cartotecnica e Legatoria - Machines for Paper Converting and Bookbindery
Finishing Solutions since 1937
 

   <<< BACK

MACHINES FOR PAPER CONVERTING

 
castor.jpg (34621 byte)
 
  
   CASTOR
   Board routing machine, to produce ring binders, covers,
   sample book covers with joint spine and any paper-over-board item.
   Available in two different versions: with blades to remove a board strip,
   and with saws and enhanced dust extractor with
   new design self cleaning filters.
   - Top-loading automatic feeding.
   - Output belt (optional)
   • Extra-large size
   • Up to over 3000pcs/h
   • Fast change-over time
   • Precision and quality
 

     PDF
 
Castor
ariemat-aut.gif (39889 byte)

 

   ARIEMAT

   Programmable Creaser to produce binders, covers, ring binders, folders,
   lever-arch files, sample books and any other creased items.
   Suitable for materials of thickness from 200g/sm up to over 4mm.
   High-power precision creasing device with adjustable blades.
   - Manual or automatic feeding with non-stop top-loading device
   - Feeding between the dragging rollers, fibre-optic sensor to detect sheet
   - Computer-controlled creasing positions
   - Output on collecting table or on side-moving conveyor belt (optional)
   • Up to 2400 pcs/h
   • The creasing programs can be set, stored and recalled in a few seconds  
   • Set-up in less than one minute: ideal even for minimum quantities
 

     PDF
 
Ariemat


 

   ARIES
   Creaser to produce binders, covers, ring binders, folders,
   lever-arch files, sample books and any other creased items.
   Suitable for materials of thickness from 200g/sm up to over 4mm.
   High-power precision creasing device with adjustable blades.
   - Manual feeding, output on collect table
   - Front multiple guide
   • Inexpensive and precise
   • It can be updated to Ariemat version
 

     PDF
 

draco-aut.jpg (27201 byte)

   DRACO
   Rotary creasing machine for board for the production of presspan
   three-flap folders, office files, ring-binders, project folders,
   ring-binders and similar products.
   - Sheet is fed manually, or automatically by deep-pile sheet feeder
   - Introduction is synchronised by a device with millimetric adjustment
   - Creasings can be executed in any point of the sheet
   - Supplied with one roller at choice
   - Creasing rollers for boards of any type and thickness
   - Pre-loading device optimized loading time (auto-fed versions)
   • Up to 2400 pcs/h
   • All creasing lines are produced in one pass
   • Modular: the machine can be automated in subsequent steps
   • Strength and reliability for non-stop operation
 

     PDF

 


mira.jpg (31926 byte)
 

   MIRA
   Double head riveting machine to fit two rivets simultaneously
   on ring-binders, sample books and similar products.
   - Back tables to support the board
   - Wide setting range for the distance between the two rivets
   - Pneumatic or motor-powered.
   - Suitable for rivets from 3/6 to 3/10 types
   - Automatic start device with board position sensors (optional)
   • Fast and accurate
   • Suitable for all types of rivets
 

     PDF
 
rigel-doppia1.jpg (21870 byte)
   RIGEL
   Cornering machine for mitre-cut of wrapping materials or to round
   the corners, of paper, laminated paper, cloth, buckrum, board etc.
   - Cutting unit with blade and counter-blade
   - Versions: single or double head
   - Supplied with two sets of knives at choice between round or mitre cut
   - Other knives available
   • High production
   • Cut is always perfect
 

     PDF
 

 
  
   HELIOS
  
Gluer with transport belt, for paper, cloth, fabric, buckrum, PVC,
   board, cardboard and other materials for paperconverting,
   bookbindery and box-making.
   - Top-surface gluing unit for hot and cold glue with re-circulating pump
   - Viscosity control unit with mixer (optional)
   - Normal or vacuum transport belt
   - Nip roller Auriga at the end of the belt (optional)
   - Indexing stop and board spotting guide (optional)
   • Versatile and accurate
   • Suitable to all production requirements
   • Rust-proof materials: long life and ease of cleaning and maintenance
   • It can feed more operators along the belt
 

     PDF
 

lynx-t.jpg (33665 byte)
lynx.jpg (32818 byte)

   LYNX
  
Gluing machine, suitable for both PVA and hot animal jelly glues,
   for paper, cloth, fabric, buckrum, PVC etc.
   - Glue heating by thermo-controlled resistance
   - Twin-roller smearing system: perfect dosage of the glue
   - Versions: table-top, with stand and special-size
   - Pressure device to glue rigid materials (optional)
   • Versatile and precise
   • Suitable to all production requirements
   • Rust proof materials ensure long life and ease of maintenance

     PDF
 

auriga52.jpg (41896 byte)  
auriga.jpg (24234 byte)
 
 
   AURIGA
   Nip-roller press with, for pressing and smoothing glued sheets of paper,
   board and similar materials.
   - Big diameter rubber coated pressure rollers
   - Pressure and thickness are adjustable independently
   - Mechanical drive system of the rollers enables pressing thick materials
   - Easy removable collector table,to reduce the over all dimensions
   - Speed-variator to facilitate lamination of difficult adhering materials (optional)
   • Removes wrinkles and bubbles
   • Ready to be connected in-line with Helios and Heliomat gluing machines.


     PDF
 

pyxis.jpg (28616 byte)
 

   PYXIS
   Edge-turning machine, to turn-in the glued edge of paper-over-board items:
   binders, book-covers, sample-books, signboards for shop windows etc.
   - Pressing jaws of plastic-coated steel, for a quick cleaning
   - Versions: treadle-pedal, pneumatic and special size
   - Automatic cycle device to adjust pressure time on the material (optional)
   • Quality and production guaranteed
   • Strength and reliability for non-stop operation
 

     PDF
 

  
   ANTLIA
   Edge-gluer for paper, card-board, plastic, wood etc.
   - It uses all types of water-based cold glues
   - Dosage basin with micrometric setting
   - Depth squares at input and output
   - Thickness up to 15mm
   • Easy cleaning
   • Long lasting guaranteed by the use of rust-proof materials
   • Gluing on top part of the sheet: quick and precise work
 


     PDF
 

wega.jpg (33097 byte)  

sirius.jpg (32145 byte)
 

 
 WEGA - SIRIUS
   Table-top gluing machine for paper, cloth, fabric, buckrum, PVC etc.
   - Glue dosage by micrometric scraper
   - Smearing on materials up to 0.3mm thick
   - Available versions with full-surface gluing, or for gluing on stripes
     and on the edges of the sheet
   • Long life guaranteed by use of rust-proof materials
   • Suitable to all production requirements
  
   WEGA
   - For cold glue
   - Width 25cm

   SIRIUS
   - For both hot and cold glue
   - Width 37cm or 52cm
   - Pressure device to glue rigid materials (optional)


     PDF
 
Copyright 2012-2016 CMC ITALIA Srl - Tutti i diritti riservati - All rights reserved - P.IVA/VAT IT 02884110962